Product features

• for the assembly of KOENIG EXPANDER® series MB from Ø 12 - 22 mm (.406" - .875" Inch), series CV from Ø 12 - 22 mm, series LP from Ø 12 mm and series RE from Ø 12 - 14 mm (.406" - .562" Inch)
• Height: approx: 1470 mm
• Width: appr. 400 mm (max. 580 mm)
• Depth: approx. 535 mm
• Working area (height:): 250 mm (working height between table top and cylinder, without setting tool)
• Working area (depth): 200 mm (center-line spacing between cylinder and C frame)
• Table (width x depth): 300 x 190 mm
• Weight: approx. 190 kg
• Crimping force: 50 kN (max. force 52,5 kN at 6 bar)
• Quill stroke: 60 mm
• Working stroke: 20 mm (within the cylinder ram)
• Working speed: 30 mm/sec (max. possible at 6 bar)
• Operating voltage: 230 V/110 V, automatic switchover to corresponding power supply
• Operation: VISUAL POINT terminal with QVGA graphic display
• Force / distance control: Sensor adjusted with SIT reference sensor
• Software: WINSCOPE software with USB and Ethernet connection

Additional information

Quick tool change avoids long changeover times. The required working stroke is preprogrammed and can be retrieved by the Expander type to be processed (max. 32 memory locations). In addition, the working stroke is referenced for each individual Expander, which guarantees high process stability and quality. The press is force and distance controlled. The relevant data can be transferred into the customer’s internal system or documented via USB or Ethernet connection. This ensures traceability, process reliability, and complete documentation.