BancLok® F 821/822/823 - Press-in threaded inserts with expansion anchoring without head, with gear rim and anchoring profile, for wood, soft plastics and composite materials

BN 1049
Product image of BancLok® F 821/822/823 - Press-in threaded inserts with expansion anchoring without head, with gear rim and anchoring profile, for wood, soft plastics and composite materials
  1. Product image of BancLok® F 821/822/823 - Press-in threaded inserts with expansion anchoring without head, with gear rim and anchoring profile, for wood, soft plastics and composite materials
  2. Technical drawing with dimensions of BancLok® F 821/822/823 - Press-in threaded inserts with expansion anchoring without head, with gear rim and anchoring profile, for wood, soft plastics and composite materials
  3. Assembly illustration for BancLok® F 821/822/823 - Press-in threaded inserts with expansion anchoring without head, with gear rim and anchoring profile, for wood, soft plastics and composite materials
Overlay

1

/3
Product image of BancLok® F 821/822/823 - Press-in threaded inserts with expansion anchoring without head, with gear rim and anchoring profile, for wood, soft plastics and composite materials
  • Product image of BancLok® F 821/822/823 - Press-in threaded inserts with expansion anchoring without head, with gear rim and anchoring profile, for wood, soft plastics and composite materials
  • Technical drawing with dimensions of BancLok® F 821/822/823 - Press-in threaded inserts with expansion anchoring without head, with gear rim and anchoring profile, for wood, soft plastics and composite materials
  • Assembly illustration for BancLok® F 821/822/823 - Press-in threaded inserts with expansion anchoring without head, with gear rim and anchoring profile, for wood, soft plastics and composite materials

BancLok® F 821/822/823 - Press-in threaded inserts with expansion anchoring without head, with gear rim and anchoring profile, for wood, soft plastics and composite materials

BN 1049
Headform
Straight knurled
Brand
BancLok®
Brandtype
F 821/822/823
Material
Brass
Surface
plain

Assembly

1. Place shoulder of insert into pre-drilled hole.

2. Press in the insert by using a setting punch with pilot.

3. Fasten the workpiece with screw:

- The cup point or the ribbing anchored firmly while screwing in the wall of the hole.

- The residual strength acts as a screw locking.

Variants

CAD