KEENSERTS® KNT 01/03
BN 2086 - Hand insertion tools for inserts with locking kees heavy duty KNHM / KNHML
所有价格均以最低订购量为基础。如果您有任何问题或特殊要求，请联系Bossard。
特点
| Brand |
Brand
KEENSERTS®
|
| Brandtype |
Brandtype
KNT 01/03
|
| Material |
Material
Steel
|
Assembly notice
1. Screw the KEENSERTS® inserts onto the threaded pin of the KNT – Tool.
2. Screw the KEENSERTS® inserts in workpiece with KNT - Tool until the locking kees stop at the chamfer (recommended hole preparation)
3. Drive the kees with short and precise hammer strokes or via press ca. 1/3 in the workpiece. The kees can be controlled after each stroke.
4. Drive in the kees completely until they are flushed with the surface (end position)
5. Unscrew the KNT - Tool. The KEENSERTS® inserts is installed.