KOENIG EXPANDER® EXPRESS 3000

• for the installation of KOENIG EXPANDER® series MB from Ø 3 - 10 mm (.093" - .375" Inch), series CV from Ø 3 - 10 mm, series LP from Ø 3 - 10 mm and series RE from Ø 4 - 10 mm (.156" - .375" Inch)
• Height: approx. 1360 mm
• Width: approx. 340 mm (max. 530 mm)
• Depth: approx. 495 mm
• Working area (height): 250 mm (working height between table top and cylinder, without setting tool)
• Working area (depth): 200 mm (center-line spacing between cylinder and C frame)
• Table (width x depth): 220 x 160 mm
• Weight: approx. 140 kg
• Compressive force: 30 kN (max force 29.5 kN at 6 bar)
• Cylinder ram: 60 mm
• Working stroke: 10 mm (within the cylinder ram)
• Working speed: 40 mm/sec (max. possible at 6 bar)
• Operating voltage: 230 V/110 V, Automatic switchover to corresponding power supply
• Operation: VISUAL POINT terminal with QVGA graphic display
• Force / distance control: Sensor adjusted with SIT reference sensor
• Software: WINSCOPE software for connection to a PC

Quick tool change avoids long changeover times. The required working stroke is preprogrammed and can be retrieved by the Expander type to be processed (max. 32 memory locations). In addition, the working stroke is referenced for each individual Expander, which guarantees high process stability and quality. The press is force and distance controlled; an RS232 interface can be used to trace corresponding data on the customer's computer for later processing. The required software is included in the scope of delivery.